Tell us about yourself!
Hello SirVery nice achievement, I'm trying to build it, I have a little problem with the encoder circuit, I don't see the two 47k on the diagram, and there is no encoder gerber.If you are kind enough to inform me, I thank you very much and send you my cordial greetings.patrick
Sir,I come back to you, I would like to modify the program a little to display the date in the metric option in the correct order, day, me, year out I can't manage to compile your program which version of gcc gnu etc are you using, if so you can tell me.Cordial greetings
D,I burned but two pro mini 3.3v cards, impossible to restart the boot, so I decided to unsolder it from the board to mount while waiting for a pro mini 5v that I managed to program, I mounted this map on a support to be able to change it later, with the nano.hex version display good but no dialogue with the gps, with the 32k version, dialogue with the gps but display is constantly updating, and with the pro mini version 8mhz ditto.That's it for the news if it can help you.Thank you and good day
it works !so it works for a pro mini 5v, with the led and regulator removed, and with the nano.hex software, the error comes that I had wired tx gps to rx1_2 pro mini, but the software for the nano tx will to D2 of the nano!M...
Hello SirI found your modified file last night, thank you, I'll try it when I have pro mini 3v again, I can't wake up mine. the version with pro mini 5v will consume a little more, According to Mr BACHETTI the modified pro mini versions: for a 5v 3.5µa and for a 3.3v 1.5µa. standby of course.Thanks again later.
Re, bravo for your responsiveness, on the other hand I have a problem loading with xloader or avrdude, is the program too large, on the other hand I tried with pro_mini 5v 16mhz and it works 100% loading and replay ok on the other hand, as the plate is not mounted on the plate, with the pro_mini 3.3v 8mhz delicate synchronization and loading fails, thank you and congratulations!
Thank you very much for your kindness, thanks to your excellent project I am trying to learn how to compile a project but for the moment it is hard.see you soon sir.
Thank you for your answer, I'm not close to eight days, if you can make a version for mini pro 8Mhz.it bothers me a bit to have to unsolder the pro mini 3.3v, I'm afraid to unsolder the original quartz and program the fuses, I didn't quite understand the manipulation.Thank you for your efforts. patrick
Hello SirCongratulations on your magnificent achievement, I did the assembly but with an arduino pro mini in 3v so quartz of 8Mhz, for the moment I do not want to modify this one, but by flashing with your exe for nano, it does not work the display is good but no serial link with the gps, I think it's due to the frequency of the pro so I would like to modify the makefile, but I can't compile there are errors, Can you please help me, I'm not good enough in programming, thank you and congratulations again
Bonjour,Un grand merci Monsieur d'avoir partagé ce magnifique travail.L'horloge est splendide ! je l'ai réalisée pour ma petite fille, du coup sur le charme je vais en faire une seconde pour moi! Bravo et encore tous mes remerciementsPatrick